Husqvarna Viking Accessory User's Guide 2019 1
4. Place the fabric and cord under the Single Wel
t Cord Foot with the cording in the groove on the underside of the foot. 29 5. Sew to cover the cording with the fabric. To stitch covered welt cord into a seam: 1. Snap on the Single Welt Cord Foot. Select center needle position straight stitch, stitch length 3. 2. Place the covered welt cord on the right side of the fabric along the seam line. Place it under the Single Welt Cord Foot with the welt cord in the groove of the foot. Stitch the welt cord to the fabric. Clip the seam allowance of the welt cord at curves and corners. 3. Place the second piece of fabric right sides together with the first. The welt cord will be between the two layers. Place the welt cord in the groove and stitch with the first stitching line up. Touch the width to adjust the needle position slightly to the right to cover the first stitching. 10 10 MM HEMMER 412017645 1 2 3 4 5 6 7 Not for DESIGNER DIAMOND™ series, BRILLIANCE™ series, DESIGNER RUBY™ series, DESIGNER TOPAZ™ series, SAPPHIRE™ series, OPAL™ series, EMERALD™ 122, 118, 116, EDEN ROSE™ 250M, TRIBUTE™ 140M, DESIGNER JADE™35, JADE™ 20. Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot. 1. Snap 10 mm Hemmer onto needle plate of machine. 2. Place fabric into the scroll/guide of the 10 mm Hemmer, rolling it up to the needle. 3. Sew. Do not help the fabric roll. Simply guide it. 10 MM HEMMER 412990045 8 9 BRILLIANCE™ SERIES, DESIGNER DIAMOND™ SERIES, DESIGNER RUBY™ SERIES, DESIGNER TOPAZ™ SERIES, SAPPHIRE™ SERIES, OPAL™ SERIES, DESIGNER JADE™35, JADE™ 20. 10 Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot. 1. Snap 10 mm Hemmer onto needle plate of machine. 2. Place fabric into the scroll/guide of the 10 mm Hemmer, rolling it up to the needle. 3. Sew. Do not help the fabric roll. Simply guide it. HOME DEC SEWING