PFAFF® Accessory Catalog 2022 - English 1
SEWING UTILITY ACCESSORIES BLINDHEM FOOT FOR IDT™
SYSTEM 820256096 D E G J K L for IDT™ system The Blindhem Foot is perfect for sewing invisible hems. Use it to sew the elastic blindhem for an optional finish and you won‘t need additional finishing on the hem edge. Sewing by hand is no longer necessary. 1. Snap on the Blindhem Foot. 2. Fold the edge in by the hem width. 3. Unfold the hem again so that hem edge protrudes by about 1 cm. 4. Position fabric so red edge guide runs along edge of folded hem. 5. Use the needle position and the width dial to regulate the penetration of the needle in the crease. TIP: If the stitch punctures are visible on the right side of the project, adjust red guide slightly using screw on right side of foot. NARROW EDGE FOOT FOR IDT™ SYSTEM The Narrow Edge Foot is perfect for precision topstitching and joining lace and/ or fabric edges together (for example, attaching lace to a finished fabric edge). The metal guide in the center of the foot keeps the two fabrics evenly spaced. 1. Set machine for zigzag or decorative stitch. Needle position will vary according to stitching position desired. 2. For narrow edge topstitching, place the center guide of the presser foot against the fabric edge. 3. Move the needle into the desired left position and topstitch. 821142096 B C D E F G J K L for IDT™ system Lace/Edge Joining: Position lace or finished fabric edges on either side of blade of foot and join together with zigzag or decorative stitch. Sewing lace to fabric: Place the folded/pressed edge of your fabric to the left of the center guide and the finished edge of your lace to the right of the center guide. Both fabric and lace should be placed under the foot, right side up. The center guide will keep the fabrics properly separated to allow for more precise stitching. Choose a zigzag stitch and sew, catching the edge of the fabric and the lace. Adjust the width and length of your zigzag as desired. 18