Teng Tools catalogue 2016 1
Socket Sets 1” Drive Socket Sets M1115MM 1” Drive
socket set 15 piece 1” drive metric 12 point socket set containing 560mm T handle, 200 Supplied in metal case with carrying handles. (680x210x110mm, 27.6 kilos) Accessories 1” drive Flip reverse ratchet head with quick release, 22” handle bar,T bar adaptor, 200 and 400mm extension bars Regular sockets 1” drive 12 point 36, 41, 46, 50, 55, 60, 65, 70, 75, 80mm Stock No M1115MM | Code No. 7353-0107 DO’S AND DONT’S OF SOCKETRY Use the correct drive of ratchet or accessory to suit the size of fastening you need to turn and how much torque you need to apply. The larger the drive the more torque can be applied, particularly for stubborn or over tightened fastenings. tighten or loosen. It might also damage the socket. chose the correct tool so that the weakest point is the rust, friction or adhesive that is holding the fastening in place. the opposite to normal After use always check the tools are clean and dry before putting them away, this will help to avoid problems such as corrosion and moving parts seizing or becoming tight. Regularly use a light oil to keep ratchet mechanisms in good working order and free from corrosion. Do not use heavy oils or greases as these tend to attract dirt which may cause the ratchet mechanism to slip. Chrome sockets and accessories are designed to be used where pressure or torque is applied evenly, impact tools can damage regular sockets. Use impact sockets with impact tools. If the fastening will not turn with the tools you are using you need to use a more powerful tool such as a say it is dangerous and can break the tools. 155 Teng Tools