SEWING PINTUCK FOOT, 5-GROOVE You can easily use
the classic Pintuck Foot on cotton, light-weight wool or other fine fabrics. Create pintucks to add a nostalgic touch to linens, cushions, blouses or children‘s clothing. 1. Snap on the Pintuck Foot. 2. Insert a twin needle - 5-groove: 2.0 twin needle 820226096 B C D E F G J K 3. Thread the twin needle (see manual for threading tips). 4. Using a water-soluble marker, draw a placement line for your first pintuck. 5. Sew your first pintuck. When you start on the second pintuck, allow the first pintuck to run parallel in a groove in the foot. This will produce evenly spaced pintucks. DECORATIVE ACCESSORIES Twin Needle 620073896: 2 mm PINTUCK BLADE Use the Pintuck Blade to accentuate the tucks. The Pintuck Blade is attached to your machine‘s needle plate. The fabric is raised by the blade during sewing to make the tucks higher and more visible. For heavier materials, use the Five-groove Pintuck Foot and the large Pintuck Blade. 1. Attach desired Pintuck Foot to machine. 2. Snap the round knob of the Pintuck Blade into the round hole on the stitch plate with 820678096 J K* K* except creative™ 1.5 the blade pointing towards the needle. Insert a 1.6 mm - 2.0 mm twin needle into the machine. 3. Draw or create lines on fabric where pintucks are desired. Position the line at the center of the presser foot. Stitch slightly slower than normal, guiding the fabric. The Pintuck Blade will raise the center of the fabric to produce defined pintucks. (Gently pull the fabric taut while sewing the pintucks.) Twin Needle 620073796: 1,6 mm 620073896: 2 mm 35