SEWING DECORATIVE ACCESSORIES THREE HOLE YARN FOO
T FOR IDT™ SYSTEM Embellish your project with different types of decorative cords or yarn using beautiful PFAFF® 9 mm stitches and the Three Hole Yarn Foot. 820920096 F G J for IDT™ system This foot will easily guide the cords or yarn through the openings in the front of the foot back through the groove under the presser foot. The decorative cords or yarn will be stitched over creating a beautiful braid embellishment. 1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin. 2. Select a 9 mm decorative stitch. Note: Decorative stitches that use forward motion work best (Avoid stitches with too much backward motion.) 3. Thread decorative cords or yarn into the holes from the top of the foot, using the Yarn Threader, prior to attaching the foot onto the sewing machine. 4. Make sure the cords or yarn slide easily through the openings. (If the yarn is too thick it will create too much tension and the feeding might be affected.) 5. Snap on the Three Hole Yarn Foot. 6. Engage IDT™ system. 7. Place the threaded cords or yarn under the presser foot with a 5 cm (2”) tail. 8. Place a tear away stabilizer underneath the fabric and place your fabric under the presser foot. 9. Sew carefully, not too fast. If your machine has a speed control reduce the sewing speed to easily guide the fabric and yarn as you sew. GATHERING FOOT Metal Foot 820668096 B C D E F G J K Gathering is a classic decorative technique. It‘s easy with this‚ special foot, which is especially useful for sewing flounces on cushions and curtains or for attaching gathered seams on children‘s clothing. You can simultaneously stitch and gather two layers of fabric quickly and easily. 1. Set the machine for straight stitch with the needle in far left position. 2. Place fabric to be gathered under the presser foot with cut edge extending slightly to the right of the presser foot. Insert non-gathering fabric fully into slot of foot. Fabrics should be right sides together. 3. Guide fabric, allowing machine to pull bottom fabric freely for uniform gathering. TIP: Altering stitch length will alter fullness of gathers. A single layer of fabric may also be gathered by placing under foot and adjusting stitch length and tension to desired fullness. 52