QUILTING ACCESSORIES 1/4 INCH QUILTING FOOT FOR I
DT™ SYSTEM 820926096 D E G J K for IDT™ system A quilt consists of two layers of fabric with a layer of batting sandwiched between them. Many pieces of fabric can be joined together in continually changing patterns to form the top layer of the quilt. The 1/4 inch Quilting Foot is particularly suitable for joining these pieces of fabric. The clearance between the needle and the outer edge of the foot is 1/4 inch (6.3 mm) and between the needle and the inner edge of the foot 1/8 inch (3.15 mm). 1. Attach the 1/4 inch Quilting Foot. 2. Engage the IDT™ system, if available on your machine. 3. Sew fabric together using straight stitch. 4. When using 1/4 inch seam allowance, guide fabric along outer edge of foot. When using a 1/8 inch seam allowance, guide fabric along inner edge of foot. CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM The Clear 1/4 inch Quilting Foot is great for joining pieces of fabric as it gives clear visibility when sewing 1/4, 1/8 and 3/8 inch seams. The red lines on the presser foot mark 1/4 inch pivot points in front of and behind the needle. 1. Place two pieces of fabric right sides together. 2. Select straight stitch, stitch length 2.5. 3. Engage IDT™ system. 820883096 D E G J K for IDT™ system 4. Place the fabric under the presser foot. 5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using 1/4 inch seam allowance, guide the fabric along the outer edge of the toe. When using 3/8 inch seam allowance, guide the fabric along the outer edge of the foot. 6. To pivot 1/4 inch from the end of the fabric, stop sewing when the fabric edge reaches the first red mark on the foot. 60