SERGER/OVERLOCK CORDED WAVY EDGE FOOT 620097296 c
overlock™ hobbylock™ Sewing a decorative wavy edge is easy with the Corded Wavy Edge foot. The curvy, softly ruffled edge is a perfect finish for bridal veils, figure skating costumes, ballet skirts, crafts and more. Note: For best results, use fabric with stretch. For fabric with no stretch, cut on the bias. 1. Set the machine for a 3-thread rolled edge. 2. Snap on the Corded Wavy Edge foot. 3. Insert a 0.3mm nylon fishing line (or similar) into the opening in the foot. The fishing line will be covered by the rolled edge. 4. Start to sew slowly. Make sure the fishing line is hidden in the rolled edge as you sew. 4.0 and 3.0 2.5 Tip: * 40 wt. rayon embroidery threads in a contrasting color in the upper and lower loopers will give a shiny colorful edge. DECORATIVE YARN APPLICATION FOOT This foot is used for sewing yarns (cords, nylon gut) up to a thickness of 1.0 mm. This produces an undulating or stiffer hem (e.g. on wedding dresses and valance). Preparing the machine • Needle: Right needle • Stitch type: 620117396 hobbylock™ • Stitch length: 2.0 Two thread lower looper thread wrapped rolled hem or three thread upper looper thread wrapped rolled hem 2 mm • Differential feed lever: Normal position • Upper knife: • Sewing 1. Place the fabric under the presser foot. 2. Thread cord (or nylon gut) through slot (A) and under finger (B) of the presser foot. 3. Test sew on a piece of fabric before starting to sew. Working positron 89