SERGER/OVERLOCK CLEAR COVERSTITCH FOOT 620096896
coverlock™ With the Clear Coverstitch foot, you can see your fabric and marked line under the foot as you sew. 1. Set the machine for a Coverstitch or a Chainstitch. 2. With a water soluble marker, draw a line on the fabric to mark the stitching line. 3. Snap on the Clear Coverstitch foot. 4. Use default stitch settings. Adjust if needed. 5. Place the fabric under the presser foot and the needles. Start to sew into the fabric without chaining off first. 4.0 and 3.0 6. Use the red center marking on the foot as a guide as you follow a line drawn on the fabric. The Clear Coverstitch foot will give you a great view of the marked line and of your fabric while sewing. COVERSTITCH FLAT TRIM FOOT With the Flat Trim foot, you can easily add lace and trims to the top of the fabric with a coverstitch to create beautiful decorative edges and effects. 1. Set the machine for a Coverstitch wide. 2. Snap on the Flat Trim foot. 3. Use default stitch settings. Adjust if needed. 620096996 coverlock™ 4. Insert the fabric edge into the lower section on the left side of the foot. Slide the fabric under the foot and under the needles. 4.0 and 3.0 5. Insert the trim into the upper section on the right side of the foot. Slide the trim toward the back of the foot beyond the needles, leaving a short tail of trim behind the needles. while sewing. Tip: Use tweezers to slide the fabric andthe trim to the correct position under the needles. 6. Lower the needles into the trim and the fabric. Lower the Flat Trim foot 7. As you sew, hold the fabric in your left hand and the trim in your right hand. Tip: If you want a finished fabric edge, press a ¼” (6mm) hem to the right side of the fabric before inserting the fabric into the Flat Trim foot. The lace will cover the fabric raw edge when sewn in place. 99