HUSQVARNA® VIKING® 2021 Accessory User's Guide 1
106 GATHERING FOOT 620116896 For HUSKYLOCK™ s15 m
achine. This foot is most suited for gathering when sewing tiered skirts, yokes, cuffs and frills on skiris, etc. This foot is also suited for sewing two fabrics together and gathering the bottom fabric in one operation. Preparing the machine • Needle: Left or right, or both left and right • Stitch type: • Stitch length: Three—thread overlock or four-thread overlock 3-5 mm • Differential feed lever: Gathering position • Upper knife: Working position Sewing 1. Place two layers of fabric on machine with separator plate (A) in between the upper and lower fabrics. 2. Sew 2-3 stitches. 3. Hold and lightly guide upper and lower fabrics separately while sewing. LACE FOOT 620117296 For HUSKYLOCK™ s15 machine. This foot is used for sewing lace or borders together or onto the workpiece. Preparing the machine • Needle: • Stitch type: • Stitch length: Right needle Three-thread overlock or three—thread standard rolled hem 1.5 - 3 mm • Differential feed lever: Normal position • Upper knife: Working or non-working position Sewing 1. Place the fabric under guide finger (A) and lace on top of guide finger (A). 2. If necessary, loosen screw (C) and slide guide plate (B) to the left or right to adjust stitch width. 3. Tighten screw (C). 4. Guide lace along guide plate (B) and sew. Note: If there is no necessity to cut the fabric edge, place both fabric and lace on top of guide finger (A) . Be sure to disengage the upper knife. OVERLOCK SEWING AND EMBELLISHING