HUSQVARNA VIKING Accessory User's Guide - German 1
4. Place the fabric and cord under the Single Wel
t Cord Foot with the cording in the groove on the underside of the foot. 23 5. Sew to cover the cording with the fabric. To stitch covered welt cord into a seam: 1. Snap on the Single Welt Cord Foot. Select center needle position straight stitch, stitch length 3. 2. Place the covered welt cord on the right side of the fabric along the seam line. Place it under the Single Welt Cord Foot with the welt cord in the groove of the foot. Stitch the welt cord to the fabric. Clip the seam allowance of the welt cord at curves and corners. 3. Place the second piece of fabric right sides together with the first. The welt cord will be between the two layers. Place the welt cord in the groove and stitch with the first stitching line up. Touch the width to adjust the needle position slightly to the right to cover the first stitching. SÄUMER 10 MM 412990045 8 9 Serie BRIALLIANCE™, Serie DESIGNER DIAMOND™, DESIGNER SAPPHIRE™85, serie DESIGNER RUBY™, serie DESIGNER TOPAZ™, serie SAPPHIRE™, serie OPAL™, 116, DESIGNER JADE™ 35, JADE™ 20. 10 Zum Nähen eines 10 mm Saumes in dünne bis normale Stoffe. Geradstich mit Stichlänge 2,5 einstellen und Nähfuß A einsetzen. 1. Den Säumer auf die Stichplatte der Nähmaschine setzen und einrasten. 2. Stoff in die Führungsschnecke des Säumers legen und zusammengerollt bis zur Nadel ziehen. 3. Nähen. Beim Nähen des Saumes nicht ziehen oder schieben, sondern nur senkrecht halten. HEIMTEXTILIEN