Husqvarna Viking Accessory User's Guide 2019 1
108 PIPING FOOT 620116996 For HUSKYLOCK™ s15 mach
ine. This presser foot is suited for sewing welting between two layers of fabric. Preparing the machine • Needle: • Stitch type: • Stitch type: Left or both left and right Three-thread overlock or four-thread overlock 2-5mm • Differential feed lever: Normal position • Upper knife: Working position Sewing 1. Place fabric with right sides facing. 2. Place cording (piping) in between upper and lower fabrics and insert fabrics under cording foot with cording positioned in groove under foot. 3. Sew while guiding both cording (piping) and fabric. Note: Cording (piping) using bias tape and cord can also be done with this foot. BEADING FOOT 620117496 For HUSKYLOCK™ s21 and s25 machine. The Beading Foot smoothly guides beads and pearls through a channel on the foot for easy application on garments or crafts. 1. Set the overlock machine for the desired stitch. 2. Pull the bead string through the channel on the underside of the foot. 3. Snap the Beading Foot onto the machine. 4. Turn the handwheel to sew the first two stitches to keep the beads in place. 5. Sew pearls onto the edge of fabric, cutting just a little bit of fabric as you sew. Or sew along the fold without cutting. Note: The needle should penetrate about ⅝” (1.5mm) from the fabric edge. OVERLOCK SEWING AND EMBELLISHING