Hultafors EN 2023 (2) 1
2023 Pry Bar Aluminium, Demolition A demolition b
ar with a hollow handle made of specially alloyed aluminium making it light weight and strong at the same time. The low weight compared to steel pry bars and burke bars makes it more gentle on the body, which is especially important when working above shoulder height. The claw, made from hardened boron steel – is broad and robust but still thin for the best possible access. The curvature of the claw and the heel allow you to work at a comfortable position and you don’t have to pry with the handle pushed all the way down to the ground. • Wide claw with nail puller, in hardened, high-alloy boron steel. • Handle made from extremely strong aerospace-grade aluminium. • Aluminium does not rust and withstands cold temperatures better. • The claw and heal is optimised for ergonomic and efficient work. Art.no. 841054 Model A 1500 SK Length 1500 mm Weight 3400 g Material Aluminium, Steel Qty/pack 1 pcs EAN 7 391408 410540 Pry Bar Aluminium, with Steel Point An aluminium pry bar that also can endure breaking work. The steel point makes it able to withstand high breaking loads. • Manufactured in ”Aerospace aluminium” for high strength and less flexing. • Aluminium pry bars are lighter and easier to work with, especially when working at shoulder height. • An aluminium tool does not rust, and has better resistance to cold temperatures. • It can be bent about three times as much as a steel tool without being deformed. • The tip is made of hardened, high-alloy boron steel and will therefore last for a long time. Art.no. 841014 Model A 1500 SR Length 1500 mm Weight 3200 g Material Aluminium, Steel Qty/pack 1 pcs EAN 7 391408 410144 Pry Bar Aluminium, with Pinch Point Able to withstand high breaking loads. The bent point prevents you trapping your fingers close to the floor. Can be used when tear down moulds. • Manufactured in ”Aerospace aluminium” for high strength and less flexing. • Aluminium pry bars are lighter and easier to work with, especially when working at shoulder height. • An aluminium tool does not rust, and has a better resistance to cold. • It can be bent about three times as much as a steel tool without being deformed. • The tip is made of hardened, high-alloy boron steel and will therefore last for a long time. Art.no. 841024 Model A 1500 SB Length 1500 mm Weight 3200 g Material Aluminium, Steel Qty/pack 1 pcs EAN 7 391408 410243 123 PRYING BARS