HUSQVARNA® VIKING® Accessory Catalog 2022 1
102 ELASTIC FOOT 620117896 For HUSKYLOCK™ s21 and
s25 machines and AMBER™ AIR s|600. Note: To adjust the stretch of the elastic: • Turn the tension screw to the right for more stretch. • Turn the screw to the left for less stretch. • Be careful not to stretch the fabric while sewing. The Elastic Foot guides and stretches narrow elastic (¼-½”, 6-12 mm) as you sew it to fabric. It is great for sewing for active wear, lingerie and other elastic insertion techniques. 1. Set the overlock machine for the desired stitch. 2. Loosen the screw at the front of the Elastic Foot to release the tension on the roller. Insert the elastic into the foot. 3. Snap on the foot and pull the elastic until it reaches behind the foot. 4. Tighten the tension screw to stretch the elastic. 5. Turn the handwheel to sew the first few stitches to secure the elastic. 6. Place the fabric under the foot and sew both the elastic and the fabric together. 7. Check the stitch and adjust the tension if necessary. ELASTIC FOOT 620116796 For HUSKYLOCK™ s15 machine. This foot is used for attaching elastic tape to the garment and the amount of contraction of the elastic tape can be adjusted as required. This foot can also be used for attaching tape to prevent stretching. Preparing the machine • Needle: Left or right, or both left and right • Stitch type: • Stich length: Three-thread overlock or four-thread ultra stretch mock safety stitch 3-5 mm • Differential feed lever: Normal position • Upper knife: Working or non-working position Sewing 1. Before attaching the sewing foot to machine, pass the elastic tape through presser foot and adjust stretch with adjusting screw (A). 2. Attach presser foot to machine. 3. Sew 2 - 3 stitches while pulling the elastic tape lightly to the rear of machine. 4. Continue to sew the elastic tape onto the fabric while lightly pulling the end of elastic tape. OVERLOCK SEWING AND EMBELLISHING