HUSQVARNA® VIKING® Accessory Catalog 2022 1
111 NEW! GATHERING FOOT 413306145 For AMBER™ s|10
0 The Gathering Foot is perfect for gathering a single layer of fabric or simultaneously gathering and stitching two layers of fabric. (The bottom fabric layer will be gathered and the top layer remains flat.) Suitable for light and medium weight woven fabrics. 1. Set the overlock machine for the desired stitch. 2. Snap on the Gathering Foot. 3. Insert the bottom fabric layer (fabric to be gathered) between the needle plate and the Gathering Foot all the way up to the cutter, with right side up. 4. Insert the top fabric layer in the opening of the Gathering Foot and even with the bottom layer right side down. 5. Lower the presser foot and sew. Guide the fabric against the fabric guide, letting the bottom layer feed freely to gather. Tip: To increase the fullness of the gathering: • Increase the needle thread tension • Set the differential feed to a higher number • Adjust the stitch length to a higher number A single layer of fabric may also be gathered by placing it under foot and adjusting stitch length, differential feed and needle thread tension to desired fullness. NEW! PEARL FOOT 413306245 For AMBER™ s|100 The beading foot smoothly guides beads and pearls through a channel on the foot for easy appilcation on garments or craft projects 1. Set the overlock machine for the desired stitch. 2. Pull the bead string through the channel on the underside of the foot. 3. Snap the Beading Foot onto the machine. 4. Turn the handwheel to sew the first two stitches to keep the beads in place. 5. Sew pearls onto the edge of fabric, cutting just a little bit of fabric as you sew. Or sew along the fold without cutting. Note: The needle should penetrate about 5/8” (1.5mm) from the fabric edge. OVERLOCK SEWING AND EMBELLISHING