HUSQVARNA® VIKING® Accessory Catalog 2022 1
24 1/4" (6 MM) BIAS BINDER 412989545 1 2 3 4 5 6
7 8 9 To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm) wide bias strip of light weight fabric, or use packaged narrow double fold Bias Binding. Straight stitch, length 2.5, or zigzag or decorative stitch at desired length. 1. Snap on Bias Binder. 2. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot and pull it down under the foot. 3. Place the edge to be bound into the groove on the left side of the funnel guide. 4. Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen the screw on the top of the foot and position the funnel guide as needed. ADJUSTABLE BIAS BINDER 412985045 1 2 3 4 5 6 7 8 9 5 mm 5 mm Make beautiful edge finishes with your favorite bias tape. Adjustable to fit bias tapes in different widths, from ¼" (6 mm) to ¾" (20 mm). 1. Thread with sewing thread on top and in the bobbin. 2. Snap on the Adjustable Bias Binder. 3. Use the screw on the right side of the bracket to adjust the width of the opening to fit the bias tape. 4. Cut the end of the bias tape to a 45 degree angle. Insert the bias tape from the outside of the bracket, into the slot that matches its width, and pull it down under the foot. 5 mm – 20 mm 5 mm – 20 mm 5. Place the edge to be bound into the groove on the left side of the bracket. 6. Loosen the screw on the top, in the back of the foot and adjust the bracket as needed. 7. Select a narrow zigzag, a straight stitch or a decorative stitch. Sew slowly, keeping the fabric to be bound, snugly in the groove as you sew. HOME DEC SEWING