HUSQVARNA® VIKING® Accessory Catalog 2022 1
58 INTERCHANGEABLE DUAL FEED 920219096 5 6 7 Not
for EMERALD™ series, EDEN ROSE™ 250M, TRIBUTE™ 140M, and 145M. The Dual Feed Foot with changeable presser feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, stretch fabrics, imitation leathers and fabrics need precise pattern matching. Snap on the Changeable Straight Stitch Foot. Select the center needle straight stitch. Adjust it up to a maximum stitch length of 6. Snap on the Changeable Zigzag Foot and select stitches up to a maximum of 7 mm wide and 6mm long. 1. Remove the presser foot ankle by unscrewing the ankle screw. 2. Place the Duel Feed Foot onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Dual Feed Foot onto the presser foot bar with the presser foot ankle screw. Reduce presser foot pressure to 3. Snap-on and remove the changeable presser foot 3. With presser foot bar in the up position, place the presser foot under the Dual Feed Foot. 4. Push the changeable foot upwards so that it snaps into place. 5. To remove the changeable foot, push the front of the foot upwards until the foot snaps off. How to attach the guide The two guides included with the Dual Feed Foot will help you sew parallel rows of stitching side by side as in channel quilting or tucking. There is one guide for the left side, and one for the right. 6. Insert the guide into the hole in the back of the dual feed. 7. Adjust the space between the foot and the guide by pulling it to the left or to the right. WALKING FOOT 416358301 For EMERALD™ SERIES, EDEN ROSE™ 250M, Tribute 140M, 145M. The Walking Foot makes it easy to sew several fabric layers such as quilting, match plaids or stripes, or sew napped or slippery fabrics. The feed dogs of the walking foot work with the feed dogs of the machine to keep the fabric layers moving together. The Even Feed Foot securely grips the top layer or layers of fabric while the sewing machine feeds the fabric from below. Plaids, stripes, and quilt layers stay perfectly aligned and leather, suede and vinyl flow easily through your machine. 1. Remove the presser foot and presser foot ankle. 2. Position the arm of the Walking Foot over the needle clamp screw and attach to the shank of the machine with the screw. Tighten securely. Note: As the needle goes up and down, the feed dogs also move up and down, pulling the upper layer of fabric evenly along with the lower fabric. 3. Select the straight, zigzag, or other desired stitch. Do not select stitches with many backward stitches. 4. Place fabrics under the Walking Foot and stitch. QUILTING