HUSQVARNA® VIKING® Accessory Catalog 2022 1
CHANGEABLE OPEN TOE FOOT (for 920219096 Interchan
geable Dual Feed) 413237845 5 6 7 Not for 59 8 EMERALD™ 122, 118 and 116 machines, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M. The Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching. Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches. 1. Attach the Interchangeable Dual Feed to your machine: a. Remove the presser foot ankle by unscrewing the ankle screw. b. Place the Interchangeable Dual Feed onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Interchangeable Dual Feed onto the presser foot bar with the presser foot ankle screw. c. With presser foot bar in the up position, place the Changeable Open Toe Foot under the Interchangeable Dual Feed. 2. Push the Changeable Open Toe Foot upwards so that it snaps into place. 3. Choose a decorative or a satin stitch. 4. Sew. The red markings on the foot will help you guiding the fabric as you sew. CHANGEABLE QUILTERS GUIDE FOOT (for Interchangeable Dual Feed) 413155545 5 6 7 Not for EMERALD™ 122, 118 and 116 machines, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M. Use the Changeable Quilter’s Guide Foot when stitching in the ditch along a seam line. The foot has guidelines to make it easy to accurately turn corners for ¼ (6mm) or 1/8 (3mm) seams. 8 1/4” 1/4” 1/2” The Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/ or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching. 1. Stitching in the ditch means stitching in the finished seam line. 2. Snap on the Changeable Quilter’s Guide Foot. Select the center needle straight stitch and adjust it up to a maximum stitch length of 6. 3. Place the fabric to be stitched under the presser foot aligning the guide in the center of the foot with the seam line. 4. To pivot ¼ (6mm) from the end: Select the Needle Up/Down to activate the needle down. Sew the seam. Stop sewing when the front line on the foot is even with the edge of the fabric. Raise the presser foot, pivot and continue sewing. 5. The Changeable Dual Feed Foot makes feeding several layers smooth and easy. QUILTING