Singer Guide ENG 1
UTILITY GARMENT SEWING BLIND HEM FOOT #250034196
M/C Code: MA, MB, MC* The Blind Hem Foot allows you to professionally finish your projects with a machine hem that is undetectable from the right side. Use it to hem pants, dresses, skirts, curtains, etc. 1. Snap on the Blind Hem Foot. 2. Set machine for Blind Hem Stitch or Stretch Blind Hem Stitch. 3. Finish edge of hem. Then fold up and press. 4. Turn back to create a fold about ¼” from the top edge of hem. 5. Position the hem under the foot so that the fold is against the guide in the center. Turn the knob on the right side of the foot to adjust the guide so that widest zigzag stitch of the Blind Hem Stitch catches only 1 or 2 threads of the fabric fold. How to fold Fabric *Models 4208 & 4212 require the optional universal shank part #250033996 #250034296 M/C Code: MB, CA, CB, CC, CE, EA, EB,EC SIDE CUTTER ATTACHMENT #250035896 M/C Code: MA, MC* The Side Cutter Attachment is sometimes called a Cut and Hem Foot because it simultaneously hems and trims the fabric while you sew a seam. Similar to a serger, it has a blade to trim the fabric at the same time it sews a seam and finishes it. The Side Cutter gives garments a professional finish. 1. Position the Side Cutter Attachment with the forked arm over the needle screw post and the shank on the presser foot bar. 2. Secure the attachment. Remove the clear guard/cover. 3. Clip about 1” into the fabric that is to be cut off. 4. Select the desired stitch (usually zigzag or overcast). 5. Check the stitch width to be certain that the needle doesn’t hit the stitch finger. 6. Position the fabric with the clipped edge against the blade and sew. The stitch finger keeps the stitching flat and smooth. 10 Note: The machine tension and stitch length and width may need to be adjusted depending on the fabric.