Singer Guide ENG 1
UTILITY GARMENT SEWING ROLLED HEM FOOT #416283901
M/C Code: MA, MB, MC*, CA, CB, CC, CE, EA, EC The Rolled Hem Foot rolls the fabric to enclose the raw edge while sewing. It works best with very light to medium weight fabrics. This foot allows for quickly sewing professional finished edges for ruffles, scarves, napkins, etc. 1. Snap on Rolled Hem Foot. 2. Fold and press a double hem the width of the finished hem on the underside of the fabric – about 1-1½”. 3. Place under the presser foot and stitch a few stitches along the folded hem. 4. Stop with the needle in the fabric, raise the presser foot and position the folded hem into the funnel or scroll portion of the foot. 5. Lower the Rolled Hem Foot and continue to sew, holding the fabric vertically - the funnel or scroll will “roll” the fabric to form the hem. Models 4208 and 4212 require the optional universal shank part #250033996 Note: The Rolled Hem Foot can also be used for couching yarn or decorative threads. Feed the end of the yarn through the funnel and into the groove under the foot. Set the machine for a zigzag or decorative stitch, adjusting the length and width as desired. NON-STICK FOOT #250035696 M/C Code: MA, MB, MC*, CA,CB, CC, CE, EA, EB, EC The Non-Stick Foot is sometimes called a Teflon Foot. It is used to sew specialty fabrics such as leather, plastic, vinyl and oilcloth. The slick surface on the underside of the Non-Stick Foot allows these fabrics to glide smoothly under the foot. 1. Snap on Non-Stick Foot. 2. Select the desired stitch. 3. Adjust length. 4. If fabrics need to be pinned together, do so in the seam allowance so that unwanted pinholes are not created from the straight pins or use paper clips. 5. After stitching, use a cool iron and pressing cloth to press seams. *Models 4208 and 4212 require the optional universal shank part #250033996 #250041396 M/C Code: CD Note: When sewing these difficult fabrics, frequently the stitch length should be increased to avoid perforations in the seamline. 15