Singer Guide ENG 1
EMBROIDERY ENDLESS EMBROIDERY HOOP #250031796 M/C
Code: EB The Endless Hoop makes it very simple to create borders for garments and home decorator projects. The hoop size is 7” x 4” (180mm x 100 mm) and includes six border designs. 1. Place the fabric and stabilizer into the hoop. 2. Line up the fabric with the guide on the right side of the hoop. 3. Snap the clamp in place to secure your fabric in the hoop. 4. When the embroidery is completed, a jump (alignment) stitch marks the matching point for perfect placement of the next embroidery. 5. Unsnap the clamp to release the fabric and stabilizer. 6. Slide the fabric and stabilizer forward and align the needle with the jump stitch. 7. Make sure that the fabric is lined up with the guide on the right side of the hoop. 8. Snap the clamp back in place and continue to embroider. 5” X 7” EMBROIDERY HOOP #250031696 M/C Code: EB Many commercial embroidery designs are designated as 5” x 7” in size, making this hoop perfect to use when embroidering these designs. It holds your fabric taut and permits precise placement of your 5” x 7” design. It also eliminates the use of excess stabilizer when using a larger hoop than needed. Six free downloadable 5” x 7” embroidery designs are included. 1. Loosen the screw on the hoop and remove the inner section of the hoop. 2. Place the fabric and stabilizer onto the outer part of the hoop. 3. Position the inner section of the hoop over the fabric and stabilizer and press down so that the inner hoop slips into the outer hoop.. 4. Tighten the screw. Pull the fabric until smooth and taut. 5. Position the hoop onto the machine and begin embroidery. 31