HUSQVARNA® VIKING® 2021 Accessory User's Guide 1
2,0/2,5 2,0/2,5 3 GROOVE PIN TUCK FOOT WITH RAISE
D SEAM PLATE 412845645 1 2 3 4 5 6 7 Not for DESIGNER DIAMOND™ series, DESIGNER RUBY™ series, DESIGNER TOPAZ™ series, SAPPHIRE™ series, OPAL™ series, EDEN ROSE™ 250M, TRIBUTE™ 140M, JADE™series, BRILLIANCE™ series, DESIGNER SAPPHIRE™ 85. TWIN NEEDLE 620104696: 2 mm, Size 80 620104796: 2,5 mm, Size 80 Sew quick tucks in medium weight fabrics. Use with Twin Needle. Straight stitch, length 2.5. 1. Snap on foot. Insert and thread 2.0 or 2.5 twin needle. 2. Pintucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot. 3. Place tuck in outside groove of foot to guide next tuck. Note: Snap on Raised Seam Plate for heavier fabrics or to place cord in tucks. For corded tucks, place cord or yarn in guide on raised seam plate. Note: Use the Edge/Quilting Guide (412601945) for evenly spaced tucks. * Not suitable for use with Automatic Needle Threader 53 MARKING FOOT 411850345 1 2 3 4 5 6 7 Not for EMERALD™ 122, 118 and 116 machines, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M. 8 9 Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly. Tailor Tacks: 1. Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove Open/ladder seams: 1. Stitch two pieces of fabric right sides together. 2. Pull the fabrics to expose the open seam created by the looping threads. 3. Press seam allowances away from the open work and stitch down if desired. Decorative Loops or Fringe: 1. Stitch with Marking Foot following desired design. 2. Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them. (For fringe, cut at center of loops.) HEIRLOOM SEWING