ProtecWork Catalogue eng 1
Heat and Flame Protective Wear / Outer layer Shor
ts & Pirates For optimal protection against Electric arc accidents you should always wear long-sleeved tops as well as full length trousers with sufficient arc protection. But if you are not working in the risk boundaries it might be acceptable to wear shorts or ¾ length of trousers. The following styles are made of the same great material as our full- length trousers and offer you protection against heat and flame, and have antistatic properties as well as high visibility. Shorts and pirate trousers can of course also be complemented with the different holster pockets models – depending on your preference. 20471 14116 1149-5 6160 ProtecWork, Shorts, High-Vis Class 1 Stay protected and visible in these tough, flame-retardant high-visibility shorts. Features several pockets, including DuPont™ Kevlar® fiber reinforced equal leg pockets. • Elastic gusset in crotch for great comfort and ventilation • Leg pockets featuring knife fastener, tool loops at both sides, mobile phone compartment and detachable ID badge as well as an electrician's key and knife holder • DuPont™Kevlar® fiber reinforcement inside ruler/tool pocket 6600 • Reflective heat seal tape around the legs EN ISO 20471:2013 Class 1 EN ISO 14116:2015 Index 3 EN 1149-5:2018 Material: 49% modacrylic FR, 42% cotton, 5% aramid, 3% polyamide, 1% antistatic, 300 g/m². Size: 44-64 Fit: Regular 20471 14116 14404 1149-5 6161 ProtecWork, Pirates Trouser, High-Vis Class 2 Stay protected and visible in these tough, flame-retardant high-visibility shorts. Features several pockets, including DuPont™Kevlar® fiber reinforced leg pockets. Pre-bent knees and drawstring at leg opening. • Elastic gusset in crotch for great comfort and ventilation • Leg pockets featuring knife fastener, tool loops at both sides, mobile phone compartment and detachable ID badge as well as an electrician's key and knife holder • DuPont™Kevlar® fiber reinforcement inside ruler/tool pocket • Reflective heat seal tape around the legs EN ISO 20471:2013 Class 2 EN ISO 14116:2015 Index 3 6600 EN 14404:2010 Garment is certified for use with: 9112 D3O LITE Kneepad, 9116 FR Kneepad, 9191 D3O LITE Kneepad Level 1 Type 2 EN 1149-5:2018 Material: 49% modacrylic FR, 42% cotton, 5% aramid, 3% polyamide, 1% antistatic, 300 g/m². Reinforcement: 39% modacrylic, 28% CORDURA® Size: 44-64 Fit: Regular , 17% cotton, 15% aramid, 1% antistatic, 270 g/m². 58